
Note – Several error messages may appear when executing an smb mount while mounting windows partitions. Check that the mount succeeded after the call by running the subcommand sp get mount.
The required formats for remote NFS and SMB mounts are as follows:
■For NFS: server_name:server_exported_mountpoint
■For SMB: //server_name/windows_share_name
Return Codes
TABLE H-59 lists the return codes for this subcommand.
TABLE H-59 Return Codes for Subcommand sp add mount
Return Code | ID | Description |
|
|
|
NWSE_Success | 0 | Command successfully completed. |
NWSE_InvalidUsage | 1 | Invalid usage: bad parameter usage, conflicting |
|
| options specified. |
NWSE_InvalidArgument | 4 | One or more arguments were incorrect or invalid. |
NWSE_NoPermission | 6 | Not authorized to perform this operation. |
NWSE_NoMemory | 8 | Insufficient memory. |
NWSE_Busy | 9 | Device or resource is busy. |
NWSE_RPCConnected | 11 | RPC client already connected. |
NWSE_RPCConnRefused | 12 | RPC connection refused. |
NWSE_NoRouteToHost | 13 | No route to host (network down). |
NWSE_HostDown | 14 | Host is down. |
NWSE_UnknownError | 15 | Miscellaneous error not captured by other errors. |
|
|
|
202 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004