Sun Microsystems V40z, V20Z manual SP Get Events Subcommand

Return Codes

TABLE H-14lists the return codes for this subcommand.

TABLE H-14Return Codes for Subcommand sp delete event

Return Code	ID	Description
NWSE_Success	0	Command successfully completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter usage, conflicting
		options specified.
NWSE_RPCTimeout	2	Request was issued, but was not serviced by the
		server. RPC procedure timed out and the request
		may or may not have been serviced by the server.
NWSE_RPCNotConnected	3	Unable to connect to the RPC server.
NWSE_NotFound	5	Entity (user, service, file, path, etc.) was not found.
NWSE_NoPermission	6	Not authorized to perform this operation.
NWSE_NoMemory	8	Insufficient memory.
NWSE_InvalidOpForState	22	Invalid operation for current state.

SP Get Events Subcommand

Description: Returns detailed information about all active SP events. By default, event ID, last update, component, severity and a message are displayed.

Administrators can view detailed information about all the currently active system events and perform various actions related to each event.

You can view this information in the System Events table, which contains a row for each unique active system event, or using this command. For a list of all possible events, refer to the TABLE 3-4in Chapter 3.

Format

Command format:

sp get events [ {-i --id} <EVENT ID> ] [{-d --detail} ]

[{ -v --verbose}] [{-H noheader}][{-D --delim <DELIMITER>}]

Appendix H Service Processor Commands 169