
TABLE G-2 Arguments for Subcommand sensor get
Arguments | Description | ||
|
|
|
|
Suppresses the display of the sensor ID column. By default, this | |||
|
|
| column always displays when more than one sensor is selected. |
Suppresses the column headings. |
{
Return Codes
TABLE G-3 lists the arguments for this subcommand.
TABLE G-3 Return Codes for Subcommand sensor get
Return Code | ID | Description |
|
|
|
NWSE_Success | 0 | Command successfully completed. |
NWSE_InvalidUsage | 1 | Invalid usage: bad parameter usage, conflicting options |
|
| specified. |
NWSE_RPCTimeout | 2 | Request was issued, but was not serviced by the server. |
|
| RPC procedure timed out and the request may or may |
|
| not have been serviced by the server. |
NWSE_RPCNotConnected | 3 | Unable to connect to the RPC server. |
NWSE_InvalidArgument | 4 | One or more arguments were incorrect or invalid. |
NWSE_NotFound | 5 | Entity (user, service, file, path or other) was not found. |
NWSE_NoPermission | 6 | Not authorized to perform this operation. |
|
|
|
156 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004