Note – Ensure that the baud rate value passed to the
Disabling the SOL feature
To disable the feature, run the following command:
#ssh
Launching an SOL Session
To launch an SOL session, run the following command:
#ssh spipaddr
Terminating an SOL Session
To terminate an SOL session:
1.Press Control-E.
2.Press the C key.
3.Press the period key (.).
You can also terminate an SOL session by terminating the ssh session:
1. Press Enter.
1.Press the tilde key (~).
2.Press the period key (.).
Chapter 4 Further Management Information 71
