Sun Microsystems V20Z, V40z manual SP Delete Snmp Destination Subcommand

SP Delete SNMP Destination Subcommand

Description: Deletes a single SNMP destination (either IP address or host name).

Format

Command format:

sp delete snmp-destination { IP_ADDRESS/HOSTNAME {-a --all} [-q --quiet]

TABLE H-78lists the arguments for this subcommand.

TABLE H-78Arguments for Subcommand sp delete snmp-destination

ArgumentsDescription

IP ADDRESS/HOSTNAME Specifies the IP address or hostname of the destination to remove. This argument is repeatable to remove multiple destinations at one time.

[-a	--all]	Removes all SNMP destinations.
[-q	--quiet]	If the SNMP destination to delete is not found, this argument
		specifies that no error be returned.

Return Codes

TABLE H-79lists the return codes for this subcommand.

TABLE H-79Return Codes for Subcommand sp delete snmp-destination

Return Code	ID	Description
NWSE_Success	0	Command successfully completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter usage, conflicting options
		specified.
NWSE_RPCTimeout	2	Request was issued, but was not serviced by the server.
		RPC procedure timed out and the request may or may
		not have been serviced by the server.
NWSE_InvalidArgument	4	One or more arguments were incorrect or invalid.
NWSE_NotFound	5	Entity (user, service, file, path or other) not found.
NWSE_NoPermission	6	Not authorized to perform this operation.
NWSE_NoMemory	8	Insufficient memory.

214 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004