USING YOUR RANGE
Command pads
The command pads tell the oven what to do and in what order. Some command pads have an Indicator Light. The Indicator Light comes on when you press the command pad. The ON Indicator Light comes on when you press the Start/Enter pad for an oven function.
Using the control lock
The control lock prevents unwanted use of the oven by disabling most of the control panel command pads (except CLOCK and TIMER SET/OFF).
NOTES:
•Control lock is only available when oven is not in use or control has not been set.
•Set control lock when cleaning the control panel to prevent oven from accidentally turning on.
To lock or deactivate the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will sound and “Loc” and 
will appear on the temperature display. When the
control is locked, “START?” will appear on the display if you press
any command pad.
To unlock the control panel:
Press and hold the Start/Enter pad for 5 seconds. A single tone will sound and “Loc” and 
will disappear from the temperature display.
Starting a function
After programming a function, you must press the Start/Enter pad to
START start the function. If you do not press the Start/Enter pad within
ENTER
5 seconds of programming, “START?” will show on the display
as a reminder. The control will return to time of day mode after 5 minutes if Start/Enter is not pressed.
Canceling a function
The Off/Cancel pad will cancel any function except for the Clock and Timer Set OFF functions. When you press the Off/
NOTE: You may hear a fan blowing in the oven even after you press the Off/ Cancel pad. This is the cooling fan. It will
CANCEL
Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time
turn off when the oven cools down.
remaining. To cancel the Minute Timer see “Using the electronic Minute Timer” section.
14
