O.POWER - Switches the amplifier
P.POWER CORD SOCKET - Connect the included power supply cord to a grounded electrical outlet in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier.
R e a r P a n e l 
7
Q. SPEAKER OUTPUT - Plug the included speaker cable in here to connect a speaker enclosure (the Fender® FM 412 loudspeaker enclosure is recommended). When using the
FM 100H to drive any other speaker enclosure, ensure that the speaker impedance is no less than 4 ohms and that the speaker is rated to handle a minimum of 100 watts.
S p e c i f i c a t i o n s
TYPE: |
| PR 656 |
|
|
PART NUMBER: |
| 2317000000 (120V, 60Hz) US |
| 2317000900 (120V, 60Hz) US DS |
|
| 2317001900 (110V, 60Hz) TW |
| 2317003900 (240V, 50Hz) AUS |
|
| 2317004900 (230V, 50Hz) UK |
| 2317005900 (220V, 50Hz) ARG |
|
| 2317006900 (230V, 50Hz) EUR | 2317007900 (100V, 50Hz) JPN | |
|
| 2317009900 (220V, 60Hz) ROK |
| |
POWER REQUIREMENTS: |
| 360W |
|
|
POWER OUTPUT: |
| 100W RMS into 4Ω @ 5%THD |
|
|
POWER AMP INPUT | IMPEDANCE: | 10KΩ |
|
|
| SENSITIVITY: | 930mV for 100W into 4Ω @ 1 kHz |
| |
FUSES: |
| F4A 125V for 100V/110V/120V ver |
| |
|
| F3A 250V for 220V/230V/240V ver |
| |
FOOTSWITCH: |
|
|
| |
|
| Channel Select / |
| |
RECOMMENDED SPEAKER: | Fender® FM 412 Loudspeaker Enclosure (P/N 2317800000) | |||
DIMENSIONS | HEIGHT: | 9.5 in | (24.1 cm) |
|
| WIDTH: | 26.0 in | (66.3 cm) |
|
| DEPTH: | 9.5 in | (24.2 cm) |
|
WEIGHT: |
| 27.0 lb | (12.2 kg) |
|
Product specifications are subject to change without notice.
✧ f e n d e r . c o m ✧
