4-57
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter4 Command Reference
temp
temp
To display the internal case temperatu re, use the temp command.
temp
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Examples The following example shows how to display the internal case temperature.
edfa > temp
85.28 (C)
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
resetmeantrig Resets the signal gain and alarm mea n level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, inter nal case temperature
alarm mean level, and internal ca se temperature alarm trigger level to the
manufacturer’s default setting s.
settempmean Sets the internal case temperature a larm mean level.
settemptrig Sets the internal case temperatur e alarm trigger level.
tempmean Displays the internal case tempera ture alarm mean level.
temptrig Displays the internal case temperature alarm trigger level.