Chapter 4 Command Reference
timeout
timeout
To display or modify the timeout interval, use the timeout command.
timeout [seconds]
Syntax Description
Defaults
Command Types
Command Modes
Command History
seconds | Specifies the number of seconds for the timeout interval. |
|
|
600 seconds
Does not change configuration
User password protected
ReleaseModification
EDFA 1.0 | This command was introduced. |
|
|
Usage Guidelines If there is no activity from the user for a given amount of time (the timeout period), the system automatically logs the user off. The value for the timeout period is displayed in seconds. The default setting is 600 seconds. Any modification to this setting applies only to the user session in progress; once the user logs off, the setting automatically resets to the default value.
Examples | The following example shows how to modify the timeout period setting. | ||
| edfa | > | timeout 500 |
| The following example shows how to view the timeout period setting. | ||
| edfa | > | timeout |
Timeout period is 500 seconds
|
| Cisco ONS 15501 User Guide |
|
| |
|
|
| |||
|
|
|
|
| |
|
|
|
| ||
