4-40
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter4 Command Reference
setgainmean
setgainmean
To modify the signal gain and alarm mea n, use the setgainmean command.
setgainmean mean
Syntax Description
Defaults 17.5 dB
Command Types Changes configuration
Command Modes Master password protecte d
Command History
Usage Guidelines The signal gain and alarm mean is measured in dB. The system accepts a minimum val ue of 7 dB and a
maximum value of 17.5 dB. If a value entered falls outside of this ac ceptable range, the command will
be ignored and have no effect.
Examples The following example s hows how to modify the s ignal gain and alarm mean.
edfa > setgainmean 17.00
Related Commands
mean Specifies the desired signal gain an d alarm mean.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
gain Displays the measured optical si gnal gain.
gainmean Displays the configured signal gain and alarm mean level.
gaintrig Displays the gain alarm trigger level.
resetmeantrig Resets the signal gain and alarm mea n level, gain alarm trigge r level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, inter nal case temperature
alarm mean level, and internal ca se temperature alarm trigger level to the
manufacturer’s default setting s.
setgaintrig Sets the gain alarm trigger level.