HP Integrity Superdome and 9000 Superdome sx2000 manual CC Command, Example B-2 CA Command

Example B-2 CA Command

CC Command

CC - Complex Configuration

•Access level—Administrator

•Scope—Complex

This command performs an initial out-of-the-box complex configuration. The system can be configured as either a single (user specified) cell in partition 0 (the genesis complex profile) or the last profile can be restored. The state of the complex prior to command execution has no bearing on the changes to the configuration. You must ensure that all other partitions are shut down before using this command. You might need to run the ID command after you create a genesis complex profile. If the genesis profile is selected, then all remaining cells are assigned to the free cell list.

150 Management Processor Commands