HP Integrity Superdome and 9000 Superdome sx2000 manual Date Command, DC Command

NOTE: This is for display only, no configuration is possible with this command.

Example B-4 CP Command

DATE Command

DATE Command - Set Date and Time.

•Access level—Administrator

•Scope—Complex

This command changes the value of the real time clock chip on the MP.

Example B-5 DATE Command

DC Command

DC - Default Configuration

•Access level—Administratrix

•Scope—Complex

This command resets some or all of the configuration parameters to their default values.

NOTE: The clock setting is not effected by the DC command.

The following example shows the various parameters and their defaults.

152 Management Processor Commands