HP Integrity Superdome and 9000 Superdome sx2000 manual Removing the Mounting Brackets

Figure 3-9 Removing the Mounting Brackets

WARNING! Do not remove the bolts on the mounting brackets that attach to the pallet. These bolts prevent the cabinet from rolling off the back of the pallet.

3.On the other side of the pallet, remove only the bolt on each mounting bracket that is attached to the cabinet.

4.Insert the ramps into the slots on the pallet.

CAUTION: Make sure the ramps are parallel and aligned (Figure 3-10).

The casters on the cabinet must roll unobstructed onto the ramp.

Unpacking and Inspecting the System 69