HP Integrity Superdome and 9000 Superdome sx2000 manual Removing the Ramps from the Pallet

3.Lift the cardboard corrugated top cap off the shipping box.

4.Remove the corrugated sleeves surrounding the cabinet.

CAUTION: Cut the plastic wrapping material off rather than pulling it off. Pulling the plastic covering off creates an ESD hazard to the hardware.

5.Remove the stretch wrap, the front and rear top foam inserts, and the four corner inserts from the cabinet.

6.Remove the ramps from the pallet and set them aside (Figure 3-5 (page 65)).

Figure 3-5 Removing the Ramps from the Pallet

Unpacking and Inspecting the System 65