HP Integrity Superdome and 9000 Superdome sx2000 manual Component Power Requirements

Table 2-8 Power Requirements (Without SMS) (continued)

Requirement	Value	Comments
Power factor correction	0.95 minimum
Ground leakage current (mA)	> 3.5 mA	See the following WARNING.

WARNING! Beware of shock hazard. When connecting or removing input power wiring, always connect the ground wire first and disconnect it last.

Component Power Requirements

Table 2-9 Component Power Requirements (Without SMS)

Component	Component Power Required 50 Hz to 60 Hz1
Maximum configuration for SD16	8,200 VA
Maximum configuration for SD32	12,196 VA
Cell board	900 VA
I/O card cage	500 VA

1A number to use for planning, to allow for enough power to upgrade through the life of the system.

IOX Cabinet Power Requirements

The IOX requires a single-phase 200-240 V ac input. Table 2-10lists the ac power requirements for the IOX cabinet.

NOTE: The IOX accommodates two ac inputs for redundancy.

Table 2-10 I/O Expansion Cabinet Power Requirements (Without SMS)

Requirement	Value
Nominal input voltage	200/208/220/230/240 V ac rms
Input voltage range (minimum to maximum)	170-264 V ac rms
Frequency range (minimum to maximum)	50/60 Hz
Number of phases	1
Marked electrical input current	16 A
Maximum inrush current	60 A (peak)
Power factor correction	0.95 minimum

Table 2-11 I/O Expansion Cabinet Component Power Requirements

Component	Component Power Required 50 Hz to 60 Hz
Fully configured cabinet	3200 VA
I/O card cage	500 VA
ICE	600 VA

IOX Cabinet Power Cords

Table 2-12lists the power cords for the IOX cabinet.

Electrical Specifications 53