loading MFSFILES Directory(bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:25953K + Data:3715K + BSS:3637K = Total:33306K
Console is on a Serial Device
Booting kernel...
6.Exit the console and management processor interfaces if you are finished using them.
To exit the EFI environment, press ^B (Control+B); this exits the nPartition console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu.
LVM-Maintenance Mode HP-UX Booting
This section describes how to boot
•On HP 9000 servers, to boot
•On HP Integrity servers, to boot
Procedure 4-7 LVM-Maintenance Mode HP-UX Booting (BCH Menu)
From the BCH Menu, you can boot
1.Access the BCH Main Menu for the nPartition on which you want to boot
Log in to the management processor, and enter CO to access the Console list. Select the nPartition console. When accessing the console, confirm that you are at the BCH Main Menu (the Main Menu: Enter command or menu> prompt). If you are at a BCH menu other than the Main Menu, then enter MA to return to the BCH Main Menu.
2.Boot the desired device by using the BOOT command at the BCH interface, and specify that the nPartition stop at the ISL prompt prior to booting (reply y to the “stop at the ISL prompt” question).
3.From the ISL prompt, issue the appropriate Secondary System Loader (hpux) command to boot the
To boot
ISL> hpux -lm boot /stand/vmunix
4.Exit the console and management processor interfaces if you are finished using them.
To exit the BCH environment, press ^B (Control+B); this exits the nPartition console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu.
Procedure 4-8 LVM-Maintenance Mode HP-UX Booting (EFI Shell)
From the EFI Shell environment, boot in
Refer to “ACPI Configuration for
