HP Integrity Superdome and 9000 Superdome sx2000 manual MP Command Option

Figure 3-43 MP Command Option

5.In the another window, open the Virtual Front Panel (VFP) by entering vfp at the MP prompt (Figure 3-44). Use this window to observe partition status.

Figure 3-44 MP Virtual Front Panel

6.From the VFP menu, enter s to select the whole system, or enter the partition number to select a particular partition. An output similar to Figure 3-45appears. In this example, no status is listed because the system 48 V has not been switched on.

Figure 3-45 Example of Partition State—Cabinet Not Powered Up

Booting and Verifying the System 103