HP Integrity Superdome and 9000 Superdome sx2000 manual IO Command, Example B-12 ID Command

•Access level—Operator

•Scope—Complex

This command configures the complex identification information. The complex identification information includes the following:

•Model number

•Model string

•Complex serial number

•Complex system name

•Original product number

•Current product number

•Enterprise ID and diagnostic license

This command is similar to the SSCONFIG command in ODE.

The command is protected by an authentication mechanism. The MP generates a lock word, and you must supply an authentication key that is dependent on the lock word. A one minute fixed timeout protects against this command being entered inadvertently. This command has no effect if the timeout pops or the wrong authentication key is entered.

This command is inoperable until the MP has determined the golden complex profile.

NOTE: When the system powers on for the first time, you must run the CC command before you can run the ID command.

Example B-12 ID Command

IO Command

IO - Display Connectivity Between Cells and I/O

•Access level—Single Partition User

•Scope—Complex

This command displays a mapping of the connectivity between cells and I/O.

158 Management Processor Commands