HP Integrity Superdome and 9000 Superdome sx2000 manual

1.To observe the power status, enter ps at the CM> prompt. A status screen similar to the one in Figure 3-50appears.

Figure 3-50 Power Status First Window

2.At the Select Device: prompt, enter b then the cabinet number to check the power status

of the cabinet. Observe Power Switch: on and Power: enabled (Figure 3-51).

Figure 3-51 Power Status Window

Figure 3-51shows that cells are installed in slots 0 and 4. In the cabinet, verify that cells are physically located in slots 0 and 4.

3.Press <CR> one more time to observe the power status (Figure 3-52).

Booting and Verifying the System 107