HP Integrity Superdome and 9000 Superdome sx2000 manual HE Command, Example B-10 EL Command

Example B-10 EL Command

MP:CM> el

Enable telnet access? (Y/[N]) y -> Telnet access enabled. MP:CM>

See also: DI, DL. Note that this command is deprecated and does not support SSH. Use the SA command instead.

HE Command

HE - Help Menu

•Scope—N/A

•Access level—Single PD user

This command displays a list of all MP commands available to the level of the MP access (administrator, operator, or single PD user). The commands that are available in manufacturing mode are displayed if the MP is in manufacturing mode.

In the following example, the MP is in manufacturing mode, so the manufacturing commands are shown in the last screen. This example is from a prerelease version of MP firmware.

156 Management Processor Commands