1.Access the EFI Shell environment for the nPartition on which you want to boot
Log in to the management processor, and enter CO to access the Console list. Select the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI menu). If you are at another EFI menu, select the Exit option from the submenus until you return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell environment.
2.Access the EFI System Partition for the device from which you want to boot
3.When accessing the EFI System Partition for the desired boot device, issue the HPUX command to initiate the \EFI\HPUX\HPUX.EFI loader on the device you are accessing.
4.Type any key within the 10 seconds given for interrupting the
5.At the HPUX.EFI interface, enter the boot
6.Exit the console and management processor interfaces if you are finished using them.
To exit the EFI environment, press ^B (Control+B); this exits the nPartition console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu.
Shutting Down HP-UX
When
On nPartitions you have the following options when shutting down
•To shut down
On
•To shut down
On
•To perform a reboot for reconfiguration of an nPartition: shutdown
•To hold an nPartition at a shutdown for reconfiguration state: shutdown
For details, refer to the shutdown(1M) manpage.
Procedure 4-9 Shutting Down HP-UX
From the
1.Log in to
Log in to the management processor for the server and use the Console menu to access the system console. Accessing the console through the MP enables you to maintain console access to the system after
Booting and Shutting Down
