Booting HP OpenVMS
To boot HP OpenVMS I64 on a
•“Booting HP OpenVMS (EFI Boot Manager)” (page 131)
•“Booting HP OpenVMS (EFI Shell)” (page 131)
CAUTION:
ACPI Configuration for HP OpenVMS I64 Must Be default On
At the EFI Shell interface, enter the acpiconfig command with no arguments to list the current ACPI configuration. If the acpiconfig value is not set to default, then OpenVMS cannot boot. In this situation, you must reconfigure acpiconfig; otherwise, booting will fail and report the INCONSTATE code when OpenVMS is launched.
To set the ACPI configuration for HP OpenVMS I64:
1.At the EFI Shell interface enter the acpiconfig default command.
2.Enter the reset command for the nPartition to reboot with the proper (default) configuration for OpenVMS.
Procedure 4-11 Booting HP OpenVMS (EFI Boot Manager)
From the EFI Boot Manager menu, select an item from the boot options list to boot HP OpenVMS using the selected boot option.
1.Access the EFI Boot Manager menu for the system on which you want to boot HP OpenVMS. Log in to the management processor, and enter CO to select the system console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI menu). If you are at another EFI menu, select the Exit option from the submenus until you return to the screen with the EFI Boot Manager heading.
2.At the EFI Boot Manager menu, select an item from the boot options list.
Each item in the boot options list references a specific boot device and provides a specific set of boot options or arguments to use when booting the device.
3.Press Enter to initiate booting using the selected boot option.
4.Exit the console and management processor interfaces when you have finished using them.
To exit the EFI environment press ^B (Control+B); this exits the system console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu.
Procedure 4-12 Booting HP OpenVMS (EFI Shell)
From the EFI Shell environment, to boot HP OpenVMS on a device first access the EFI System Partition for the root device (for example fs0:), and enter \efi\vms\vms_loader to initiate the OpenVMS loader.
1.Access the EFI Shell environment for the system on which you want to boot HP OpenVMS. Log in to the management processor, and enter CO to select the system console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI menu). If you are at another EFI menu, select the Exit option from the submenus until you return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell environment.
Booting and Shutting Down HP OpenVMS I64 131
