HP Integrity Superdome and 9000 Superdome sx2000 manual ND Command, PD Command

•Access level—Single Partition User

•Scope—N/A

The command returns you from the command menu to the main menu. Only the user that enters the command is returned to the private main menu.

Example B-17 MP Main Menu

ND Command

ND - Network Diagnostics

•Access level—Administrator

•Scope—Complex

This command enables or disables network diagnostics. This enables or disables the Ethernet access to MP Ethernet ports other than the main telnet port (TCP port 23). Disabling the network diagnostic port prevents the user from accessing the system with diagnostic tools such as JUST, GDB, LDB and firmware update (FWUU).

Example B-18 ND Command

MP:CM> nd

Network diagnostics are currently enabled.

Do you want to disable network diagnostics? (Y/[N]) y -> Network diagnostics are disabled.

MP:CM>

MP:CM> nd

Network diagnostics are currently disabled.

Do you want to enable network diagnostics? (Y/[N]) y -> Network diagnostics are enabled.

MP:CM>

See also: DC Command

PD Command

PD - Set Default Partition

•Access level—Operator

•Scope—Complex

This command sets the default partition. If a default partition already exists, then this command overrides the previously defined partition. Setting the default partition prevents the user from

ND Command 161