HP Integrity Superdome and 9000 Superdome sx2000 manual Setting the Customer IP Address

1.Connect one end of the RJ-45 LAN cable to the LAN port on the MP (Figure 3-38).

Figure 3-38 MP LAN Connection Location

2.Connect the other end of the LAN cable to the customer-designated LAN port. Obtain the IP address for the MP from the customer.

Connect the dial-up modem cable between the MP modem and the customers phone line connection.

Setting the Customer IP Address

NOTE: The default IP address for the customer LAN port on the MP is 192.168.1.1.

To set the customer LAN IP address, follow these steps:

Connecting the MP to the Customer LAN 99