4.Exit the console and management processor interfaces if you are finished using them.
To exit the BCH environment, press ^B (Control+B); this exits the nPartition console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu.
Procedure 4-6 Single-User Mode HP-UX Booting (EFI Shell)
From the EFI Shell environment, boot in
Refer to “ACPI Configuration for
1.Access the EFI Shell environment for the nPartition on which you want to boot
Log in to the management processor, and enter CO to access the Console list. Select the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI menu). If you are at another EFI menu, select the Exit option from the submenus until you return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell environment.
2.Access the EFI System Partition for the device from which you want to boot
3.When accessing the EFI System Partition for the desired boot device, issue the HPUX command to initiate the \EFI\HPUX\HPUX.EFI loader on the device you are accessing.
4.Boot to the
After you press any key, the HPUX.EFI interface (the
fs0:\> hpux
(c)Copyright
| Boot Loader for IA64 |
| Revision 1.723 |
Press | Any Key to interrupt | Autoboot | |
\efi\hpux\AUTO ==> boot vmunix | |||
Seconds left till autoboot | - | 9 | |
[User Types a Key to Stop the
Type ’help’ for help
HPUX>
5.At the HPUX.EFI interface (the
HPUX> boot -is vmunix
>System Memory = 4063 MB loading section 0
................................................... (complete) loading section 1
........ (complete) loading symbol table
loading System Directory(boot.sys) to MFS
....
Booting and Shutting Down
