HP Integrity Superdome and 9000 Superdome sx2000 manual VM Command, WHO Command

•Access level—Single Partition User

•Scope—Complex

This command treats all characters following the TE as a message that is broadcast when <CR> is pressed. The message size is limited to 80 characters. Any extra characters are not broadcast. Also, any message that is written is not entered into the console log.

NOTE: All users connected to the MP handler receive the message, irrespective of what partition the user sending the message has access to.

Example B-29 TE Command

VM Command

VM - Voltage Margin

•Access level—Single Partition User

•Scope—Cabinet

This command adjusts the voltage of all marginable supplies within a range of +/- 5%. No reset is required for this command to become effective.

Example B-30 VM Command

WHO Command

WHO - Display List of Connected Users

•Access level—Single Partition User

•Scope—Complex

170 Management Processor Commands