HP Integrity Superdome and 9000 Superdome sx2000 manual Figure C-3 Checking for Other Users

3.Open the Command Menu by entering cm at the MP prompt.

4.Make sure that no one else is using the system by entering who at the CM prompt. Only one user should be seen, as indicated in Figure C-3.

Figure C-3 Checking for Other Users

5.Read and save the current system configuration by entering cp and the CM prompt. Cabinet and partition information appear (Figure C-4).

Figure C-4 Checking Current System Configuration

6.Go back to the Main Menu by entering ma at the CM prompt.

7.From the Main Menu, enter vfp to open the Virtual Front Panel (Figure C-5).

Figure C-5 MP Virtual Front Panel

174 Powering the System On and Off