HP Integrity Superdome and 9000 Superdome sx2000 manual DI Command, Example B-7 DF Command

Example B-7 DF Command

DI Command

DI - Disconnect Remote or LAN Console

•Access level—Operator

•Scope—Complex

This command initiates separate remote console or LAN console disconnect sequences. For the remote console, the modem control lines are deasserted, forcing the modem to hang up the telephone line. For the LAN console, the telnet connection is closed.

If the console being disconnected has an access mode of single connection (see ER command), then it is disabled, otherwise it remains enabled after the connection is dropped.

The number after the LAN console status is the number of LAN connections.

There is one active RS232 port connection to the service processor’s textual user interface. This RS232 connection is called the local RS232 port. The local RS232 port connects to a local terminal or to the CE laptop.

154 Management Processor Commands