Chapter 4 Command Reference

gain

gain

To display the measured optical signal gain, use the gain command.

gain

Syntax Description

Defaults

Command Types

Command Modes

Command History

This command has no other arguments or keywords.

None

Does not change configuration

User password protected

ReleaseModification

EDFA 1.0

This command was introduced.

 

 

Usage Guidelines

The value for measured optical signal gain is displayed in dB.

 

 

 

Examples

The following example shows how to display the measured optical signal gain.

 

edfa > gain

 

 

17.50 (dB)

 

 

 

 

 

Related Commands

 

Command

Description

 

 

 

 

 

 

gainmean

Displays the configured signal gain and alarm mean level.

 

 

 

 

 

 

gaintrig

Displays the gain alarm trigger level.

 

 

 

 

 

 

resetmeantrig

Resets the signal gain and alarm mean level, gain alarm trigger level, optical

 

 

 

input alarm mean level, optical input alarm trigger level, output signal alarm

 

 

 

mean level, output signal alarm trigger level, internal case temperature

 

 

 

alarm mean level, and internal case temperature alarm trigger level to the

 

 

 

manufacturer’s default settings.

 

 

 

 

 

 

setgainmean

Sets the signal gain and alarm mean level.

 

 

 

 

 

 

setgaintrig

Sets the gain alarm trigger level.

 

 

 

 

 

Cisco ONS 15501 User Guide

4-10

78-14134-02, Release 2.0

Page 50
Image 50
Cisco Systems 15501 manual Gain