Add-snmp-mgr, Usage Guidelines Examples | Cisco Systems 15501

Chapter 4 Command Reference

add-snmp-mgr

add-snmp-mgr

To add or modify an SNMP manager entry on the system, use the add-snmp-mgrcommand.

add-snmp-mgr manager-ip

Syntax Description

Defaults

Command Types

Command Modes

manager-ip	Specifies the IP address of the host running the SNMP manager.

None

Changes configuration

Master password protected

Command History	Release	Modification
	EDFA 1.0	This command was introduced.

Usage Guidelines

Examples

The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications. No notifications are sent unless at least one SNMP manager address is configured. The

Cisco ONS 15501 accepts a maximum of 16 IP managers.

The following example shows how to add an SNMP manager entry on the system.

edfa > add-snmp-mgr 10.1.2.71

Related Commands Command		Description
	del-snmp-mgr	Deletes an SNMP manager entry on the system.

	get-snmp-mgr	Displays an SNMP manager entry on the system.

		Cisco ONS 15501 User Guide
		Cisco ONS 15501 User Guide
	78-14134-02, Release 2.0			4-3
	78-14134-02, Release 2.0			4-3

Image 43

Cisco Systems 15501 manual Add-snmp-mgr, Syntax Description Defaults Command Types Command Modes, Usage Guidelines Examples

Contents

Corporate Headquarters Cisco ONS 15501 User Guide Cisco ONS 15501 User Guide N T E N T S Cisco ONS 15501 LED Alarm Definitions 78-14134-02, Release Set-time4-49 Set-user-pwd4-51 Show-trap4-52 DC Protection E-4 Viii Chapter Title Description PrefaceAudience Organization Conventions Preface Conventions Documentation CD-ROM Related DocumentationObtaining Documentation Cisco.com Documentation Feedback Obtaining Technical Assistance Cisco TAC Website Technical Assistance Center Obtaining Additional Publications and Information Xvi Product Description Product Overview Description Specification Optical SpecificationsMinimum Value Factory Max Value Programmable Default Constant Gain Flatness Key FeaturesOptimized Automatic Gain Control Transient Suppression Variable GainNumber Network Management High Maximum Output PowerCisco ONS 15501 Applications Low Noise Figure Ring Topologies Power Equalization in an Amplified Ring Network Cisco ONS 15501 Front Panel Adjusting to Span Loss ChangesAdding or Dropping Wavelengths See Appendix C, Connector Pinouts. This port should Feature Description Cisco ONS 15501 LED Alarm Definitions 78-14134-02, Release Creating a Site Log Installing the Cisco ONS Required Tools and Parts Installation ChecklistTask Verified By Date Optical Connection Rack-Mounting the Chassis Cisco ONS 15501 Optical Connections DC Power Connection Grounding the Chassis Connecting the Power Communication Connections Connecting the Cisco ONS 15501 to a DC Power Source Review and Operational Commands Installation CommandsSetting Up Alarm Contacts Introductory Commands 78-14134-02, Release Hardware Comments Configuring the Cisco ONSConfiguring Local Serial Communication Setting Up the Software Configuring a Basic System Monitoring Alarms and Traps Configuring for Telnet Configuring Remote CommunicationUpgrading the Flash Image Configuring for Snmp Alarm Contact Closures Pinout Alarm 78-14134-02, Release Command Reference Rorw Add-snmp-com Add-snmp-mgr Syntax Description Defaults Command Types Command ModesCommand History Release Modification Related Commands Command Description ReleaseModification Alarm Following example shows how to display the active boot bank Boot-bank Following example shows the copyright information Copyright Add-snmp-com Command DescriptionDel-snmp-com Release Modification Usage Guidelines Del-snmp-mgrAdd-snmp-mgr Ethmode Gain Gain Gainmean Gaintrig Get-snmp-com Get-snmp-mgr Defaults Command Types Command Modes Command History Help Command Reference Help Show-trap Hide-trap Hostname Specifies the host name Host-config Setinpwrmean InpwrInpwrmean Inpwrtrig Inpwr Inpwrmean Inpwrtrig Ip-config Logout Neighbor NE information Neighbor-in Neighbor-out Neighbor-out Neighbor-in Ntp Related Commands DescriptionNtp-ip Ntp Ntp-ip Optoutpwr Setoutsigpwrmean OutsigpwrOutsigpwrmean Outsigpwrtrig Outsigpwr Outsigpwrmean Outsigpwrtrig Outsigpwrtrig Ping Following example shows how to ping an IP address Ps1 Ps2 Reboot Tempmean ResetmeantrigSettempmean Settemptrig Restore Setgainmean Setgaintrig Setinpwrmean Setinpwrtrig Set-user-pwd Set-master-pwd Setoutsigpwrmean Setoutsigpwrtrig Temp Settempmean Settemptrig Time zones and correlating abbreviations Set-time Timezone Time Set-master-pwd Set-user-pwd Show-trap Show-trap 29.53 C 25.10 C 29.90 C Status Sw-download Tftp 209.128.68.145 EdfaImg.0.2 Edfa sys-info Sys-info Temp Tempmean Tempmean Temptrig Set-time Time Timeout Timezone Basic Diagnostic Procedures Troubleshooting Reading the Front Panel LEDs Isolating the ProblemStatus Description Password Recovery Technical Support Cisco ONS 15501 Alarms Controller communication failure Unacceptable Gain Appendix a Cisco ONS 15501 Alarms Cisco ONS 15501 User Guide Cisco ONS 15501 Optical Specifications Technical SpecificationsCisco ONS 15501 Electrical Specifications Cisco ONS 15501 DC Input Power Requirements Cisco ONS 15501 Mechanical Specifications Connector Pinouts Figure C-1 RS-232 and RJ-45 Connector Pinouts Code Time Zone CodesTime Zone Code Time Zone Wrist Strap Warning Translated Safety Warnings Restricted Area Warning Qualified Personnel Warning DC Protection Disconnect Device Warning Laser Radiation Warning D E IN-2 IN-3 IN-4 IN-5 IN-6