Del-snmp-mgr, Usage Guidelines, Add-snmp-mgr | Cisco Systems 15501

Chapter 4 Command Reference

del-snmp-mgr

del-snmp-mgr

To delete an SNMP manager entry on the system, use the del-snmp-mgrcommand.

del-snmp-mgr manager-ip

Syntax Description

Defaults

Command Types

Command Modes

manager-ip	Specifies the IP address of the host running the SNMP manager.

None

Changes configuration

Master password protected

Command History		Release	Modification
		EDFA 1.0	This command was introduced.


Usage Guidelines	The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications.
	No notifications are sent unless at least one SNMP manager address is configured.

Examples	The following example shows how to delete an SNMP manager entry on the system.
	edfa > del-snmp-mgr 10.1.2.71

Related Commands		Command	Description

		add-snmp-mgr	Adds or modifies an SNMP manager entry.

		get-snmp-mgr	Displays SNMP manager entry information.

	Cisco ONS 15501 User Guide
4-8	78-14134-02, Release 2.0

Image 48

Cisco Systems 15501 manual Del-snmp-mgr, Usage Guidelines, Add-snmp-mgr

Contents

Cisco ONS 15501 User Guide Corporate Headquarters Cisco ONS 15501 User Guide N T E N T S Cisco ONS 15501 LED Alarm Definitions 78-14134-02, Release Set-time4-49 Set-user-pwd4-51 Show-trap4-52 DC Protection E-4 Viii Preface AudienceOrganization Chapter Title Description Conventions Preface Conventions Related Documentation Obtaining DocumentationCisco.com Documentation CD-ROM Obtaining Technical Assistance Documentation Feedback Technical Assistance Center Cisco TAC Website Obtaining Additional Publications and Information Xvi Product Overview Product Description Optical Specifications Description SpecificationMinimum Value Factory Max Value Programmable Default Key Features Constant Gain FlatnessOptimized Automatic Gain Control Variable Gain Transient SuppressionNumber High Maximum Output Power Cisco ONS 15501 ApplicationsLow Noise Figure Network Management Power Equalization in an Amplified Ring Network Ring Topologies Adjusting to Span Loss Changes Cisco ONS 15501 Front PanelAdding or Dropping Wavelengths Feature Description See Appendix C, Connector Pinouts. This port should Cisco ONS 15501 LED Alarm Definitions 78-14134-02, Release Installing the Cisco ONS Creating a Site Log Installation Checklist Required Tools and PartsTask Verified By Date Rack-Mounting the Chassis Optical Connection DC Power Connection Cisco ONS 15501 Optical Connections Connecting the Power Grounding the Chassis Connecting the Cisco ONS 15501 to a DC Power Source Communication Connections Installation Commands Setting Up Alarm ContactsIntroductory Commands Review and Operational Commands 78-14134-02, Release Configuring the Cisco ONS Configuring Local Serial CommunicationSetting Up the Software Hardware Comments Monitoring Alarms and Traps Configuring a Basic System Configuring Remote Communication Configuring for TelnetUpgrading the Flash Image Alarm Contact Closures Configuring for Snmp Pinout Alarm 78-14134-02, Release Command Reference Add-snmp-com Rorw Syntax Description Defaults Command Types Command Modes Command History Release ModificationRelated Commands Command Description Add-snmp-mgr Alarm ReleaseModification Boot-bank Following example shows how to display the active boot bank Copyright Following example shows the copyright information Command Description Del-snmp-comRelease Modification Add-snmp-com Del-snmp-mgr Usage GuidelinesAdd-snmp-mgr Ethmode Gain Gainmean Gain Gaintrig Get-snmp-com Defaults Command Types Command Modes Command History Get-snmp-mgr Help Command Reference Help Hide-trap Show-trap Host-config Hostname Specifies the host name Inpwr InpwrmeanInpwrtrig Setinpwrmean Inpwrmean Inpwr Inpwrtrig Ip-config Logout Neighbor-in Neighbor NE information Neighbor-out Neighbor-out Neighbor-in Related Commands Description NtpNtp-ip Ntp-ip Ntp Optoutpwr Outsigpwr OutsigpwrmeanOutsigpwrtrig Setoutsigpwrmean Outsigpwrmean Outsigpwr Outsigpwrtrig Outsigpwrtrig Following example shows how to ping an IP address Ping Ps1 Ps2 Reboot Resetmeantrig SettempmeanSettemptrig Tempmean Restore Setgainmean Setgaintrig Setinpwrmean Setinpwrtrig Set-master-pwd Set-user-pwd Setoutsigpwrmean Setoutsigpwrtrig Settempmean Temp Settemptrig Set-time Time zones and correlating abbreviations Time Timezone Set-user-pwd Set-master-pwd Show-trap Show-trap Status 29.53 C 25.10 C 29.90 C Sw-download Tftp 209.128.68.145 EdfaImg.0.2 Sys-info Edfa sys-info Temp Tempmean Tempmean Temptrig Time Set-time Timeout Timezone Troubleshooting Basic Diagnostic Procedures Isolating the Problem Reading the Front Panel LEDsStatus Description Password Recovery Technical Support Cisco ONS 15501 Alarms Controller communication failure Unacceptable Gain Appendix a Cisco ONS 15501 Alarms Cisco ONS 15501 User Guide Technical Specifications Cisco ONS 15501 Optical SpecificationsCisco ONS 15501 Electrical Specifications Cisco ONS 15501 Mechanical Specifications Cisco ONS 15501 DC Input Power Requirements Connector Pinouts Figure C-1 RS-232 and RJ-45 Connector Pinouts Time Zone Codes CodeTime Zone Code Time Zone Translated Safety Warnings Wrist Strap Warning Restricted Area Warning Qualified Personnel Warning DC Protection Disconnect Device Warning Laser Radiation Warning D E IN-2 IN-3 IN-4 IN-5 IN-6