4-21
Cisco ONS 15501 User Guide
78-14134-02, Release 2.0
Chapter4 Command Reference
inpwrtrig
inpwrtrig
To display the optical input alarm trig ger level, use the inpwrtrig command.
inpwrtrig
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Usage Guidelines The value for optical input alarm trigger level is displayed in dBm
Examples The following example shows how to display the optical input alarm trig ger level.
edfa > inpwrtrig
1.00 (dBm)
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
inpwr Displays the measured optical input power.
inpwrmean Displays the optical input alarm mean level.
resetmeantrig Resets the signal gain and alarm mea n level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, inter nal case temperature
alarm mean level, and internal ca se temperature alarm trigger level to the
manufacturer’s default setting s.
setinpwrmean Sets the optical input alarm mean level.
setinpwrtrig Sets the optical input alarm trigger level.