Cisco Systems 15501 manual Neighbor-in, Neighbor NE information

Chapter 4 Command Reference

neighbor-in

neighbor-in

To display or modify the neighboring equipment details for optical input, use the neighbor-incommand.

neighbor-in [[host link-host] [ip link-ip] [port link-port]] [disable]

Syntax Description		host link-host	Specifies the hostname for input neighbor. The maximum length is
			32 characters.
		ip link-ip	Specifies the IP address for input neighbor.
		port link-port	Specifies the name for the port on the remote host providing the input
			optical signal. The maximum length is 32 characters.
			Note If the host or ip keywords are not present, the port keyword
			is not allowed.
		disable	Deletes the input neighbor information.
			Note The disable option is not allowed with any other options.
Defaults	If no values are entered, the command displays the current input neighbor details.
Command Types	Changes configuration
Command Modes	User password protected for read. Master password protected for writes.
Command History		Release	Modification
		EDFA 2.0	This command was introduced.
Usage Guidelines	In the absence of all arguments, the configured input neighbor NE information is shown.
	To include space characters in the host or port, use double quotes (for example, neighbor-in host
	“DWDM phoenix 10”). Excluding the disable keyword, whenever a keyword present, the keyword
	value must be given. Either host or ip are required while port is optional. The disable keyword deletes
	the neighbor NE information.

	Cisco ONS 15501 User Guide
4-24	78-14134-02, Release 2.0