Cisco Systems 15501 manual Resetmeantrig, Settempmean, Settemptrig, Tempmean, Temptrig

Chapter 4 Command Reference

resetmeantrig

resetmeantrig

			To reset the alarm mean and trigger levels for signal gain, optical input power, output signal power, and
			internal case temperature to the manufacturer’s default settings, use the resetmeantrig command.
				resetmeantrig
Syntax Description				This command has no other arguments or keywords.
Defaults			None
Command Types			Changes configuration
Command Modes			Master password protected
Command History				Release	Modification
				EDFA 1.0	This command was introduced.
Usage Guidelines			The manufacturer’s default setting can be found in Table 1-2 on page 1-2.
Related Commands				Command	Description
				gainmean	Displays the configured signal gain and alarm mean level.
				gaintrig	Displays the gain alarm trigger level.
				inpwrmean	Displays the optical input alarm mean level.
				inpwrtrig	Displays the optical input alarm trigger level.
				outsigpwrmean	Displays the output signal alarm mean level.
				outsigpwrtrig	Displays the output signal alarm trigger level.
				setgainmean	Sets the signal gain and alarm mean level.
				setgaintrig	Sets the gain alarm trigger level.
				setoutsigpwrmean	Sets the output signal alarm mean level.
				setoutsigpwrtrig	Sets the output signal alarm trigger level.
				setinpwrtrig	Sets the optical input alarm trigger level.
				settempmean	Sets the internal case temperature alarm mean level.
				settemptrig	Sets the internal case temperature alarm trigger level.
				tempmean	Displays the internal case temperature alarm mean level.
				temptrig	Displays the internal case temperature alarm trigger level.
		Cisco ONS 15501 User Guide
	4-38				78-14134-02, Release 2.0