Chapter 4 Command Reference
inpwr
inpwr
To display the measured optical input power, use the inpwr command.
inpwr
Syntax Description
Defaults
Command Types
Command Modes
Command History
This command has no other arguments or keywords.
None
Does not change configuration
User password protected
ReleaseModification
EDFA 1.0 | This command was introduced. |
|
|
Usage Guidelines | The value for optical input power is displayed in dBm. | ||
|
|
| |
Examples | The following example shows how to display the optical input power. | ||
| edfa > inpwr |
| |
|
| ||
|
|
|
|
Related Commands |
| Command | Description |
|
|
|
|
|
| inpwrmean | Displays the optical input alarm mean level. |
|
|
|
|
|
| inpwrtrig | Displays the optical input alarm trigger level. |
|
|
|
|
|
| resetmeantrig | Resets the signal gain and alarm mean level, gain alarm trigger level, optical |
|
|
| input alarm mean level, optical input alarm trigger level, output signal alarm |
|
|
| mean level, output signal alarm trigger level, internal case temperature |
|
|
| alarm mean level, and internal case temperature alarm trigger level to the |
|
|
| manufacturer’s default settings. |
|
|
|
|
|
| setinpwrmean | Sets the optical input alarm mean level. |
|
|
|
|
|
| setinpwrtrig | Sets the optical input alarm trigger level. |
|
|
|
|
|
| Cisco ONS 15501 User Guide |
|
| |
|
|
| |||
|
|
|
|
| |
|
|
|
| ||
