Chapter 4 Command Reference
outsigpwrtrig
outsigpwrtrig
Syntax Description
Defaults
Command Types
Command Modes
Command History
To display the output signal alarm trigger level, use the outsigpwrtrig command.
outsigpwrtrig
This command has no other arguments or keywords.
None
Does not change configuration
User password protected
ReleaseModification
EDFA 1.0 | This command was introduced. |
|
|
Usage Guidelines | The value for output signal alarm trigger level is displayed in dBm. | ||
|
|
| |
Examples | The following example shows how to display the output signal alarm trigger level. | ||
| edfa > outsigpwrtrig |
| |
| 20.00 (dBm) |
| |
|
|
|
|
Related Commands |
| Command | Description |
|
|
|
|
|
| outsigpwr | Displays the calculated output signal power. |
|
|
|
|
|
| outsigpwrmean | Displays the output signal alarm mean level. |
|
|
|
|
|
| resetmeantrig | Resets the signal gain and alarm mean level, gain alarm trigger level, optical |
|
|
| input alarm mean level, optical input alarm trigger level, output signal alarm |
|
|
| mean level, output signal alarm trigger level, internal case temperature |
|
|
| alarm mean level, and internal case temperature alarm trigger level to the |
|
|
| manufacturer’s default settings. |
|
|
|
|
|
| setoutsigpwrmean | Sets the output signal alarm mean level. |
|
|
|
|
|
| setoutsigpwrtrig | Sets the output signal alarm trigger level. |
|
|
|
|
|
| Cisco ONS 15501 User Guide |
|
| |
|
|
| |||
|
|
|
|
| |
|
|
|
| ||
