Cisco Systems 15501 manual Setgaintrig, Setgainmean

Chapter 4 Command Reference

setgaintrig

setgaintrig

To modify the signal gain alarm trigger level, use the setgaintrig command.

setgaintrig trigger

Syntax Description

Defaults

Command Types

Command Modes

trigger Specifies the desired signal gain and alarm trigger.

1.00 dB

Changes configuration

Master password protected

Command History	Release	Modification
	EDFA 1.0	This command was introduced.

Usage Guidelines

Examples

The signal gain alarm trigger level is measured in dB. See Table 1-2 on page 1-2for the minimum and maximum values. If a value entered falls outside of this acceptable range, the command will be ignored and have no effect.

The following example shows how to modify the gain alarm trigger level.

edfa > setgaintrig 2.00

Related Commands	Command	Description
	gain	Displays the measured optical signal gain.
	gainmean	Displays the configured signal gain and alarm mean level.
	gaintrig	Displays the gain alarm trigger level.
	resetmeantrig	Resets the signal gain and alarm mean level, gain alarm trigger level, optical
		input alarm mean level, optical input alarm trigger level, output signal alarm
		mean level, output signal alarm trigger level, internal case temperature
		alarm mean level, and internal case temperature alarm trigger level to the
		manufacturer’s default settings.
	setgainmean	Sets the signal gain and alarm mean level.

	Cisco ONS 15501 User Guide
78-14134-02, Release 2.0		4-41