IBM SC30-3681-08 Network address name of the local port, Network dial address of the local port

V.25bis Operating Commands

parameters

V.25bis port Parameters

Local Network Address		Name		=	v402
Local Network Address				=	15088982402
Non-Responding addresses:
Retries	=	1
Timeout	=	0	seconds
Call timeouts:
Command Delay	=	0	ms
Connect	=	0	seconds
Disconnect	=	0	seconds

Local Network Address Name:

Network address name of the local port.

Local Network Address:

Network dial address of the local port.

Non-responding addresses:

Retries

Maximum number of calls the router attempts to make to a non-responding address during the timeout period.

Timeout

If the router reaches the maximum number of retries to a non-responding address, it does not attempt to establish the call until this time has expired. This timeout period begins when the router attempts the ®rst call to an address.

Call timeouts:

Command Delay

Amount of time, in milliseconds, that the router waits to initiate or answer a call after it turns on DTR (Data Terminal Ready). If you set this parameter to 0, the router waits for the modem to respond to DTR with the CTS (Clear to Send) signal before it issues commands.

Connect

Number of seconds allowed for a call to be established. If this parameter is set to 0, the modem controls the connection establishment timeout.

Disconnect

After the routers drops DTR it waits this amount of time before it initiates further calls. If you set this parameter to 0, the router waits for the modem to respond to the DTR drop by dropping CTS and DSR before it initiates the next call.

Statistics

Use the statistics command to display the current statistics for this V.25bis interface.

Syntax:

statistics

Example:

590MRS V3.2 Software User's Guide