IBM SC30-3681-08 Sample Conguration of Remote Routers, Remote 1 router, Remote DTE, More digits

Using XTP

XTP config>add remote-dte

DTE address [ ]?402

Peer router©s internal IP Address [0.0.0.0]?128.185.100.3

Peer router©s internal IP Address [0.0.0.0]?

XTP config>add remote-dte

DTE address [ ]?403

Peer router©s internal IP Address [0.0.0.0]?128.185.100.3

Peer router©s internal IP Address [0.0.0.0]?

XTP config>add remote-dte

DTE address [ ]?404

Peer router©s internal IP Address [0.0.0.0]?128.185.100.3

Peer router©s internal IP Address [0.0.0.0]?

9. Add an XTP PVC to logically associate the local PVC to Server 1 with the

remote DTE 301.

XTP config>add pvc

Local PVC Range Start [1]?

Local PVC Range End [1]?

Local X.25 DTE address [ ]? 101

Remote PVC Range Start [1]?

Remote PVC Range End [1]?

Remote X.25 DTE address [ ]?301

When entering DTE addresses, you can specify either of the following:

A '?' in place of any digit. The '?' means any single digit in this digit position.

An '*' as the last digit of an address to represent any combination of zero or

more digits.

Sample Con®guration of Remote Routers

The following is a sample con®guration of Remote 1 router and Remote 2 router

(see Figure 20 on page 366). The process is the same as that de®ned in the section

at ªCon®guration Proceduresº on page 366.

Remote 1 router

*talk 6

Config>set data-link x25 1

Config>set data-link ppp 2

Config>network 1

X.25 Config>set address 300

X.25 Config>set clocking internal

X.25 Config>set speed 19200

X.25 Config>set equipment-type dce

X.25 Config>set pvc low 1

X.25 Config>set pvc high 1

X.25 Config>add pvc

Protocol [IP]?xtp

Packet Channel [1]?1

Destination X.25 Address [ ]?301

Window Size [2]?

Packet Size [128]?

X.25 Config>exit

Config>

Config>protocol ip

IP config>add address

Which net is this address for [0]?2

New address [0.0.0.0]?128.185.100.8

Address mask [255.255.0.0]?255.255.255.0

IP config>set internal-ip-address

Internal IP address [0.0.0.0]?128.185.100.2

IP Config>exit

Config>

Chapter 28. Using XTP 371