Interface
Displays the ATM Interface+ prompt, described in “ATM Interface Monitoring
Commands (ATM INTERFACE+Prompt)”.
Syntax:
interface
ATM-LLC
Displays the ATM-LLC+ prompt, described in “ATM-LLC Monitoring Commands”on
page 290.
Syntax:
atm-llc
ATM Interface Monitoring Commands (ATM INTERFACE+ Prompt)
This section summarizes and then explains the commands for monitoring a specific
ATM interface.
Enter the commands at the ATM INTERFACE+ prompt.
Table39. ATM INTERFACE monitoring command Summary
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on
page 10.
List ListsATM addresses and VCCs.
Trace Starts/Stops packet tracing on a specified VPI/VCI range. Tracecan be
viewed by ELS.
Wrap Starts/Stops a loopback test on the VCC.
Exit Returnsyou to the previous command level. See “Exiting a Lower
Level Environment” on page 11.
List
Use the list command to list various categories of ATMdata.
Syntax:
list addresses
all
circuit
vccs
reserved-bandwidth
addresses
Lists the ATMaddresses, along with a descriptive name, in use on the
device.
Example:

ATM Monitoring Commands (Talk5)

Chapter22. Configuring and Monitoring ATM 287