IBM SC30-3681-08 ELS Conguration Commands Talk, Groupname subsystem.eventnumber, Example clear

ELS Con®guration Commands (Talk 6)

	Table 19. ELS Con®guration Command Summary (continued)
	Command	Function
	Delete	Deletes an event number from an existing group or deletes an entire
		group.
	Display	Enables message display on the console monitor.
	Filter	Filter ELS messages based upon the net number.
	List	Lists information on ELS settings and messages.
	Nodisplay	Disables message display on the console.
	Noremote	Disables remote logging to a remote workstation.
	Notrace	Controls disablement of packet trace events.
	Notrap	Keeps messages from being sent out in SNMP traps.
	Remote	Allows messages to be logged to a remote workstation.
	Set	Sets the pin parameter and the timestamp feature options.
	Trace	Controls enablement of packet trace events.
	Trap	Allows messages to be sent to a network management workstation in
		SNMP traps.
	View	Allows viewing of traced packets.
	Exit	Returns you to the previous command level. See ªExiting a Lower Level
		Environmentº on page 11.
Add

Use the add command to add an individual event to an existing group or to create a new group. Group names must start with a letter and are case sensitive. You cannot append an entire subsystem to a group.

Syntax:
add	group_name subsystem.event_number
Note: If the speci®ed group does not exist, the following prompt asks you to
con®rm the creation of a new group:
Group not found. Create new group? (yes or no)
Advanced
Use the advanced command to enter the advanced con®guration environment. In
this environment you con®gure message buffering.
Syntax:
advanced

Clear

Use the clear command to clear all of the ELS con®guration information.

Syntax: clear

Example: clear

You are about to clear all ELS configuration information

Are you sure you want to do this (Yes or No):

168 MRS V3.2 Software User's Guide