Disable
Use the disable command to suppress data transfer for an entire group or a
specific relay port. SRAM (static read access memory) does not permanently store
the effects of the disable monitoring command. Therefore when you restart the
router, the effects of this command are erased.
Syntax:
disable group
group#
port
group
group#
Suppresses transfer of BSC Relay frames to or from a specific group.
port Suppresses transfer of BSC Relay frames to or from a specific local or
remote port.
Example:
disable port
Group number: [1]? 2
Local or Remote: [local]? remote
Group number
Indicates the group number of the port that you want to disable.
Local or Remote
Specifies whether to disable the local or remote port.
Default value: local
Enable
Use the enable command to turn on data transfer for an entire group or a specific
local interface port. SRAM does not permanently store the effects of the enable
monitoring command. Therefore when you restart the router, the effectsof this
command are erased.
Syntax:
enable group
group#
port
group
group#
Allows transfer of BSC Relay frames to or from the specified group.
port Allows transfer of BSC Relay frames to or from the specified local port.
Example:
enable port
Group number: [0]? 2
Local or Remote: [local]? remote
group number
Indicates the group number of the port that you want to enable.
Local or Remote
Specifies whether to disable the local or remote port.
Default value: local
Configuring and Monitoring BSC Relay
576 MRS V3.2 Software User’s Guide
|
|
|
|
|
|
||
||
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
||
|
|
||
|
|
|
|
|
|
|
|
|