IBM SC30-3681-08 manual 25bis Conguration Commands, Local Network Address Name

V.25bis Con®guration Commands

Table 75. V.25bis Con®guration Commands Summary

CommandFunction

? (Help)	Displays all the commands available for this command level or lists
	the options for speci®c commands (if available). See ªGetting Helpº
	on page 10.
List	Displays the V.25bis con®guration.
Set	Sets the local address, connect, disconnect, and no answer
	timeouts, number of retries after no answer, the duplexing mode,
	command delay timeout, and encoding.
Exit	Returns you to the previous command level. See ªExiting a Lower
	Level Environmentº on page 11.

List

Use the list command to display the current V.25bis con®guration.

Syntax: list

Example: list

V.25bis Configuration
Duplex				=	Full
Encoding				=	NRZ
Local Network Address		Name		=	v403
Local Network Address				=	15088982403
Non-Responding addresses:
Retries	=	1
Timeout	=	0	seconds
Call timeouts:
Command Delay	=	0	ms
Connect	=	60 seconds
Disconnect	=	2	seconds
Cable type	=	V.35		DTE
Speed	=	9600

Duplex

Displays the duplex mode for the interface once the dial connection has been established.

Encoding

Displays the transmission encoding scheme for the interface once the dial connection has been established. Encoding is either NRZ (non-return to zero) or NRZI (non-return to zero inverted).

Local Network Address Name:

Displays the network address name of the local port.

Local Network Address:

Displays the network dial address of the local port.

Non-responding addresses:

Retries

Maximum number of calls the router attempts to make to a non-responding address during the timeout period.

Timeout

If the router reaches the maximum number of retries to a

584MRS V3.2 Software User's Guide