IBM SC30-3681-08 List lmi and list permanent-virtual-circuit commands, Circuit name or number

Monitoring Frame Relay Interfaces

List

Use the list command to display statistics speci®c to the data-link layer and the

Frame Relay interface.

Syntax:
list			all
			circuit . . .
			lmi
			permanent-virtual-circuits
			pvc-groups
			switched-virtual-circuit
			svcs
			virtual-circuits
all	Displays circuit, management, and VC statistics on the Frame Relay
	interface. The output displayed for this command is a combination of the
	list lmi and list permanent-virtual-circuit commands.
circuit name or number
	Displays detailed virtual circuit con®guration and statistical information for
	the speci®ed VC using the input circuit name or DLCI.
	Example:
	list circuit 347
	Circuit name = Valencia
	Circuit state	=	Active	Circuit is orphan	=	No
	Frames transmitted	=	0	Bytes transmitted	=	0
	Frames received	=	0	Bytes received	=	0
	Total FECNs	=	0	Total BECNs	=	0
	Times congested	=	0	Times Inactive	=	0
	CIR in bits/second	=	64000	Potential Info Rate =		56000
	Committed Burst (BC) =		1200	Excess Burst (Be)	=	54800
	Minimum Info Rate	=	16000	Maximum Info Rate	=	64000
	Required	=	Yes	PVC group name	= group1
	Compression capable	=	Yes	Operational	=	Yes
	R-Rs received	=	0	R-Rs transmitted	=	0
	R-As received	=	0	R-As transmitted	=	0
	R-R mode discards	=	0	Enlarged frames	=	0
	Decompress discards	=	0	Compression errors	=	0
	Compression ratio	=	1.72 to 1	Decompression ratio = 1.10 to 1
	Encryption capable	=	Yes	Operational	=	Yes
	Encryption errors	=	0	Decryption errors	=	0
	Rcv error discards	=	0
	Current number of xmit frames queued				=	0
	Xmit frames dropped due to queue overflow				=	0
	Circuit state
	Indicates the state of the circuit: inactive, active, or congested.
	Inactive indicates that the circuit is not available for traffic because
	either the Frame Relay interface is down or the Frame Relay
	management entity has not noti®ed the Frame Relay protocol that
	the circuit is active. Active indicates that data is being transferred.
	Congested indicates that data ¯ow is being controlled.
	Circuit is orphan
	Indicates if the circuit is a non-con®gured PVC learned through LMI
	management or a callin-in for a non-con®gured SVC.

434MRS V3.2 Software User's Guide