IBM SC30-3681-08 Cong Request Tries, Cong Nak Tries, Terminate Tries, Retry Timer, Magic Number

Con®guring PPP Interfaces (Talk 6)

Example:
PPP 7 Con®g>list lcp
LCP Parameters
--------------
Config Request Tries:	20	Config Nak Tries:	10
Terminate Tries:	10	Retry Timer:	3000
LCP Options
-----------
Max Receive Unit:	1522	Magic Number:	Yes
Peer to Local (RX) ACCM:	A0000
Protocol Field Comp(PFC):	No	Addr/Cntl Field Comp(ACFC):	No
Authentication Options
----------------------
Authenticate remote using:	MSCHAP or SPAP or CHAP or PAP [Listed in priority order]
CHAP Rechallenge Interval:	0
MSCHAP Rechallenge Interval: 0
Identify self as:	ibm

Con®g Request Tries:

Number of times that LCP sends con®gure-request packets to a peer station while attempting to open a PPP link.

Con®g Nak Tries:

Number of times that LCP sends con®gure-nak (ªnot acknowledgedº) packets to a peer station while attempting to open a PPP link.

Terminate Tries:

Number of times that LCP sends terminate-request packets to a peer station to close a PPP link.

Retry Timer:

Number of milliseconds that elapse before packet transmission continues according to the number of times set by the ªCon®g triesº parameter.

Max Receive Unit:

Displays the maximum information ®eld (packet) size handled by the link.

Peer to Local (Rx) ACCM

Displays the characters that the peer must ªescapeº when transmitting packets to the router on asynchronous lines.

Magic Number:

Indicates whether the magic number loopback detection option is enabled.

Protocol Field Comp (PFC):

Indicates whether the PFC option is enabled.

Addr/Cntl Field Comp(ACFC):

Indicates whether ACFC is enabled.

Authenticate remote using:

A list of enabled authentication protocols.

Identify Self As:

The name set with the set name command.

ncp Lists the parameters for all Network Control Protocols.

Example:

Chapter 33. Con®guring and Monitoring Point-to-Point Protocol Interfaces 473