IBM SC30-3681-08 manual Subsystem all, Occurred on the router, Run-time information

ELS Monitoring Commands (Talk 5)
subsystem all
Lists all events, logging levels, and messages for every event that has
occurred on the router.
trace-status
Displays information on the status of packettracing, including con®guration
and run-time information.
Example:
list trace-status
------------------------- Configuration -----------------------------
Trace Status:ON Wrap Mode:ON	Decode Packets:OFF HD Shadowing:OFF
RAM Trace Buffer Size:100000	Maximum Trace Buffer File Size:10000000
Default Packet Bytes Traced:100		Max Packet Bytes Traced:256
------------------------ Run-time Status ----------------------------
Packets in RAM Trace Buffer:535		Free Trace Buffer Memory:180
Trace Errors:22 First Packet:23		Last Packet:557
Trace Buffers Shadowed to HD:0		Trace Buffer File Size:0

vªTrace Statusº in the LIST TRACE-STATUS display will indicate OFF when STOP-ON-EVENT action occurs.

vªHD Shadowingº in the LIST TRACE-STATUS display will indicate OFF when STOP-ON-EVENT action occurs or when Time Limit is exceeded.

vªTrace Buffer File Sizeº will display ª<wrapped>º when a wraparound has occurred in the trace ®le.

vIf disk-shadowing time limit is exceeded, but there has not been a trace record written since the time expired, thenª HD-Shadowing Time Exceeded? NO <Next trace will turn it OFF>º will be displayed. When the next trace record has been written, then ªHD-Shadowing Time Exceeded? YESº will be displayed.

ELS Config>LIST TRACE command under talk 6 displays information similar to the following:

------------------------- Configuration -----------------------------

Trace Status:ON Wrap Mode:ON Decode Packets:ON HD Shadowing:ON

RAM Trace Buffer Size:100000 Maximum Trace Buffer File Size:10000000 Max Packet Bytes Trace:256 Default Packet Bytes Traced:100

Trace File Record Size:2048 Stop Trace Event: TCP.013

Maximum Hours to HD Shadow: 1

Nodisplay

Use the nodisplay command to select and turn off messages displaying on the console.

Syntax:

nodisplayevent . . .

group . . .

range . . .

subsystem . . .

event subsystem.event#

Suppresses the displaying of messages for the speci®ed event.

group group.name

Suppresses the displaying of messages that were previously added to the

speci®ed group group( .name).

range subsystemname ®rst_event_number last_event_number

192MRS V3.2 Software User's Guide