Request Reverse Charges
Allows this protocol to override the setting of this National
Personality parameter. This does not affectthe National Personality
parameter.
Station Type
Specifies the default station type for this protocol:
Pri Primary Station
Sec Secondary Station
Peer Peer Station
Max message size
The maximum message size for this protocol. Specify a value that
is less than, or equal to, the Max MTU size of the interface.
Call User Data
Specifies the default CUD field used in call packets for this protocol.
Specify from 1-to-16 characters. If you do not specify characters,
the default 0xC3 is used.
pvc Adds PVC, window size, and packet size definitions.
Example: add pvc
IP example:
Protocol [IP]? IP
Packet Channel Range Start [1]?
Destination X.25 Address[]?
Packet Channel Range End [1]?
Window Size [2]?
Packet Size [128]?
Protocol
Specifies which protocol’s encapsulation you want to modify: APPN,
XTP,DECnet, Banyan Vines, DLSw, IP or IPX. The default is IP.
Packet Channel Range Start
Specifies the starting circuit number of this range of PVCs.
Packet Channel Range End
Specifies the last circuit number of this range of PVCs. Defaults to
the value of the Packet Channel Range Start.
Destination X.25 Address
Specifies the X.25 address of the PVC’s destination.
Remote Address
Specifies the remote address for caller ID on received calls.
Window Size
Specifies the number of packets that can be outstanding before
requiring packet confirmation. The default is 2.
Related configuration parameters are:
vSet Default Window
Packet Size
Specifies the maximum negotiable packet size for PVCs. This value
must be equal to or less than the maximum packet size specified
with the national set packet-size command. The default value for
this parameter is 128 bytes. The maximum value that may be
Configuring the X.25 Network Interface
Chapter27. Configuring and Monitoring the X.25 Network Interface 347
|
|
|
|
|
|
|
|
|
|
|
|