LMI N2 error threshold
Indicates the number of management event errors occurring within
the N3 window that will cause a reset of the Frame Relay interface.
LMI N3 error threshold window
Indicates the number of monitored management events used to
measure the N2 error threshold.
MIR % of CIR
Minimum IR, expressed as a percentage of CIR.
IR % Increment
Percentage by which the router increments the IR each time it
receives a frame without BECN until it reaches the maximum IR.
IR % Decrement
Percentage by which the router decrements the IR each time it
receives a frame that contains BECN until it reaches the minimum
IR.
DECnet length field
Indicates whether or not the DECnet length field feature is enabled.
Some Frame Relay DECnet Phase IV implementations require a
length field between the Frame Relay multiprotocol encapsulation
header and the DECnet packet. Alength field is inserted if the
DECnet length field feature is enabled.
Default CIR
Specifies the default CIR for this interface.
Default Burst Size
Specifies the default burst size for this interface.
Default Excess CIR
Specifies the default excess burst size for this interface.
Current receive sequence
Indicates the current receive sequence number that the Frame
Relay interface has received from the Frame Relay management
entity.
Current transmit sequence
Indicates the current transmit sequence number that the Frame
Relay interface has sent to the Frame Relay management entity.
Total status enquiries
Indicates the total number of status enquiries that the Frame Relay
interface has made of the Frame Relay management entity.
Total status responses
Indicates the total number of responses that the Frame Relay
interface has received from the Frame Relay management entity in
response to status enquiries.
Total sequence requests
Indicates the total number of sequence number requests that the
Frame Relay interface has sent to the Frame Relay management
entity.
Total responses
Indicates the total number of sequence number responses that the
Frame Relay interface has received from the Frame Relay
management entity.
Monitoring Frame Relay Interfaces
Chapter31. Configuring and Monitoring Frame Relay Interfaces 439