IBM SC30-3681-08 Dial Circuit Monitoring Commands, Callback

Note: Youcan only use this parameter for Channelized T1/E1 circuits.
Valid values:
For Channelized T1: 1 to 24
For Channelized E1: 1 to 31
Default value: None
Example: set timeslot1458
Dial Circuit Monitoring Commands
Table84 describes the dial circuit monitoring commands. Enter the dial circuit
monitoring commands at the Circuit Config> prompt. Youmust restart the router
for monitoring changes to take effect.
Table84. Dial Circuit Configuration Commands Summary
Command Function
? (Help) Displays all the commands available for this command level or lists
the options for specific commands (if available). See “Getting Help”
on page 10.
Callback Adds,deletes, or lists the information in the authentication cache.
Exit Returns you to the previous command level. See “Exiting a Lower
Level Environment” on page 11.
Callback
Use the callback command to add, delete or list the information in the
authentication cache.
Syntax:
callback add
delete
list
add Adds a callback number to the athentication lists.
delete Deletes a callback number from the authentication lists
list Lists the callback numbers and other information in the authentication list.
Configuring Dial Circuits
650 MRS V3.2 Software User’s Guide
|
|
|
|
|
|
|
|||||
|
|||||
|
|
|
|
||
||
||
||
||
|||