Con®guring Frame Relay Interfaces

Default Value: Default value is determined according to

CIR-defaults at the interface level

Requested incoming CIR

Speci®es the requested incoming CIR.

Valid Values: The CIR can be either 0 or a value in the range 300

bps to 2 048 000 bps.

Default Value: Value of the requested outgoing CIR

Minimum acceptable incoming Committed Information Rate (CIR)

Speci®es the minimum CIR that will be accepted if the network

cannot provide the requested CIR.

Valid Values: The CIR can be either 0 or a value in the range 300

bps to 2 048 000 bps with a maximum of the requested incoming

CIR.

Default Value: Same as minimum acceptable outgoing CIR

Requested outgoing committed burst size (Bc)

Speci®es the requested outgoing committed burst size.

Valid Values: The CIR can be either 0 or a value in the range 300

bps to 2 048 000 bps.

Default Value: Value determined according to CIR-defaults at the

interface level

Requested incoming committed burst size (Bc)

Speci®es the requested incoming committed burst size.

Valid Values: The CIR can be either 0 or a value in the range 300

bps to 2 048 000 bps.

Default Value: Value equal to requested outgoing Bc

Outgoing excess burst size (Be)

Speci®es the requested outgoing burst size.

Valid Values: The CIR can be either 0 or a value in the range 300

bps to 2 048 000 bps.

Default Value: Value determined according to CIR-defaults at the

interface level

Requested incoming excess burst size (Be)

Speci®es the requested incoming excess burst size.

Valid Values: The CIR can be either 0 or a value in the range 300

bps to 2 048 000 bps.

Default Value: Same as requested outgoing excess burst size

(Be)

Idle timer

Speci®es the time period that a SVC will remain active in the

absence of traffic. Specifying 0 designates this SVC as a ®xed

circuit that will be established the ®rst time data arrives for it and

will not be disconnected even if no traffic ¯ows over it.

Valid Values: 0 - 65535 seconds

Default Value: 60

Chapter 31. Con®guring and Monitoring Frame Relay Interfaces 411

Page 447
Image 447
IBM SC30-3681-08 Requested incoming CIR, Default Value Value of the requested outgoing CIR, Outgoing excess burst size Be